This course is suitable for individuals who relish problem-solving and have a strong desire to design and optimise advanced machines (be they driverless cars, high-speed trains, robotic manufacturing systems, tidal power stations or solar-powered generators) through the novel application of science and mathematics.
This MEng Mechanical Engineering undergraduate programme encourages critical thinking and foster curiosity through both teamwork and independent
study. The design exercises provide the opportunity for students to be engaged in cross-disciplinary challenges, preparing the way for tackling larger problems that span traditional engineering boundaries. The courses are led by academic staff from our active Research Centres, supported by specialist professionals from industry.
Our Mechanical engineering degree encompasses the remarkably successful disciplines of material sciences, thermodynamics, solid and fluid mechanics and robotics. This degree will train you in all aspects necessary for a successful career as a mechanical engineer.
Our degrees are accredited by the Institution of Mechanical Engineers, providing a path for graduates to gain CEng status.
We may demonstrate some flexibility of entry requirements in Clearing. This will depend on the results we receive and the number of spaces we have available and may be considered on a case by case basis.
Details of the standard entry requirements for 2020 are shown below.
The following is also required:
If you are an overseas applicant, you must apply for an ATAS Certificate as part of the acceptance process onto this course. See further details regarding the ATAS certificate.
If you do not qualify for direct entry, you may wish to take a foundation programme first. These programmes are designed to prepare students for entry to City's undergraduate courses.
Don't meet the entry requirements? INTO City, University of London offers a range of academic and English language programmes to help prepare you for study at City, University of London. You'll learn from experienced teachers in a dedicated international study centre.
These programmes are designed for international students who do not meet the required academic and English language requirements for direct entry. To prepare for this degree course, learn more about the International Foundation in Engineering and Mathematics.
If your first language is not English, we will require evidence of English language proficiency. Minimum requirements are:
Don't meet the English language requirements? INTO City, University of London offers English language programmes to help prepare you for study at university. These intensive and flexible courses are designed to improve your English ability for entry to degree courses.
International Students (EEA and Non EEA) coming to study in the UK, may need to apply for a visa or entry clearance to come to the UK to study. The way that you apply may vary depending on the length of your course. There are different rules for:
For more information see our main Visa page.
Limited places on this course for September 2020 may be available through Clearing and Adjustment this summer.
Applications for degree courses must be made through the Universities and Colleges Admissions Service (UCAS).
You can contact UCAS for further information using the following details:
Address: Universities and Colleges Admissions Service (UCAS), Rosehill, New Barn Lane, Cheltenham, Gloucestershire, GL52 3LZ
Telephone: from inside the UK 0871 468 0468; from outside the UK +44 (0)871 468 0468
For callers with hearing difficulties: from inside the UK use the Text Relay service on 18001 0871 468 0468; from outside the UK dial +44 151 494 1260 (text phone) and then ask the operator to dial 0871 468 0468.
For general enquiries about the admissions process at City through Clearing, visit our Clearing hub for more information. Our online Clearing Service Desk will be open from 8am on Thursday 13th August to help you with your application.
* The fee for this course will be £9,250 for each year of study for the duration of your studies.
** The fee for your first year of study will be £19,000. The institution reserves the right to increase your tuition fees annually to take account of the institution's increased costs of delivering educational services. The increase will normally be 2% but this is kept under review with reference to the RPI. If the institution intends to increase your tuition fees you will be advised of this alongside the published entry fee.
Future Finance offers students loans of between £2,500 and £40,000 to help cover tuition fees and living expenses. All students and courses are considered. All loans are subject to credit checks and approval for further details please visit the City Finance website.
Engineering has been taught at City, University of London, for over 100 years. Our 6 engineering undergraduate programmes have particular emphasis on creative design. Four leading structural engineers share their thoughts on design innovation in this video as we lead you through an inspiring historical journey through engineering.
The School has its own dedicated placements team that provides on-hand placement and internship support and guidance for you throughout your studies.
Our team of placement specialists, the Professional Liaison Unit, has extensive experience in helping students to secure professional experience across a range of industries. The team also has longstanding relationships with an impressive and diverse range of companies spanning both large and small organisations
You are strongly encouraged to undertake a 12 month internship at the end of year three. Specialist advisors within the School are in regular contact with companies to assist students in finding suitable work experience. Students are paid while on placement and are visited by their personal tutor during this time. Following placement, students more fully appreciate the context and relevance of their university studies and gain a greater understanding of the industry they are about to join. This valuable experience may count towards the requirements for a professional engineering qualification.
Placements are a fantastic way to gain professional experience in a relevant field as part of your degree. Undertaking a placement year could also count towards the experience requirement for a professional engineering qualification.
In recent years Mechanical Engineering students have been able to obtain placements at leading companies within their chosen field such as TfL, Nissan, Gamma, G2 Energy, Interserve, AECOM and Network Rail.
Mechanical Engineering and Aeronautics courses benefit from recently redeveloped facilities with modern teaching lecture theatres equipped with the latest interactive AV systems and modern IT laboratories which are updated annually.
A dynamic virtual learning environment (Moodle) provides students with access to online course materials, resources, interactive activities, assessment and communication tools.
Specialist facilities include flight deck, motion simulators, wind tunnels, optical IC Engines, optical compressors, optical fuel injection systems, flywheel, formula car simulator, micro Turbine, cavitating flows, high performance computing, flight test course.
The City Racing team takes part in the Class 1 Formula Student - the world's largest student motorsport event. Organised by the Institution of Mechanical Engineers (IMechE) as a student-run project, it gives students the opportunity to develop their skills and put them into practice. Find out more about the team.
We operate a Guarantee Scheme for first year undergraduates which means you will be offered place in one of City's affiliated Halls if you meet the Scheme's criteria.
Our Accommodation Service can also help you find private accommodation.
We offer a free language course for City, University of London students.
Course timetables are normally available from July and can be accessed from our timetabling pages. These pages also provide timetables for the current academic year, though this information should be viewed as indicative and details may vary from year to year.
Please note that all academic timetables are subject to change.
We offer an extensive support network during your time here at City, University of London – from Learning Support (including disability support) and counselling to financial and career advice – leaving you free to enjoy every opportunity campus life has to offer.
Chat to our current students and read their blogs to gain an insight into studying at City and learn more about our undergraduate and postgraduate courses.
To make sure that you can begin or continue your studies with us during the COVID-19 pandemic, we have reviewed and adapted our courses to ensure a safe learning environment for our students and staff. We have modified the way some of our courses are delivered, with many programmes being made available online.
Our approach is to encourage critical thinking and foster curiosity through both teamwork and independent study. The design exercises provide the opportunity for students to be engaged in cross-disciplinary challenges, preparing the way for tackling larger problems that span traditional engineering boundaries.
The course is led by academic staff from our active Research Centres, supported by specialist professionals from industry. The course is delivered through lectures, tutorials, group design exercises, laboratory classes and engineering workshops. Learning involves a combination of theoretical, experimental and computational study.
Assessment is by coursework and examinations. Group learning and communication skills are addressed through design studies and presentations. Practical and technical skills are assessed through laboratory work, data analysis and project reports.
Grades obtained in each year count towards the final degree classification, with increasing weight given to the later years.
You will be assessed using a variety of methods, depending on module choices:
The balance of assessment by examination, practical examination and assessment by coursework will to some extent depend on the optional modules you choose.
The approximate percentage of the course assessment, based on 2018/19 entry is as follows:
The course is delivered through lectures, tutorials, group design exercises, laboratory classes and engineering workshops. Learning involves a combination of theoretical, experimental and computational study. We encourage critical thinking and foster curiosity through both teamwork and independent study.
In Part 4 MEng students will be involved in design project, which is a key part of the integrated Master's degree action as a transition from formal education to professional life. Project work embraces not only the technical aspects of design using advanced engineering tools but develops professional skills such as management, team building and business. The focus of all the projects is the delivery of a substantial machine or device in an international context, incorporating the latest thinking in technology as supported by our engineering research activities. Motivation levels in such projects are extremely high and the experience offers graduates opportunities to excel in job interviews with project achievements as exemplars of what they have delivered.
Year one is common to all of the engineering courses. Students study the science (largely physics) and mathematics that underpin engineering principles. They are also instructed in how to develop computer program, a skill that is evermore relevant and valuable. Group exercises provide students with the opportunities to undertake preliminary engineering designs.
Students begin to specialise in year two, advancing their knowledge of solid and fluid mechanics while also studying measurement, data analysis and mechatronics.
The third year places increasing emphasis on mechanical design. Modules include: fluid mechanics, mechatronics and control, structural analysis, thermodynamics and heat transfer and engineering management.
The final year of the integrated Masters involves a major individual research project and group design exercises and modules covering variety of topics including advanced structural analysis and heat transfer, advanced computational fluid dynamics etc. Students can select one of the following options: European Global Product Design (EGPR), Formula Student, Aircraft Design Project or Gas Turbine project. Please note that project availability may vary year to year dependent on student cohort size, demand and resource constraints.
The programme specification contains more information on how the course is organised, the requirements for progression for each part and credits required for awards.
Most contact hours will take the form of lectures, interactive sessions, practical workshops and small group classes, supported by a personal tutorial system. The number will decrease as you progress and you become more able to direct your own learning.
Approximate study time based on 2018/19 entry is as follows:
Mechanical Engineering graduates work in industries such as transport, power generation, manufacturing, automotive and energy. Our recent graduates have obtained posts within Ford, Howden, Delphi Diesel Systems, AVL, Rolls-Royce, Jaguar Land Rover, Tube Lines and Holroyd.
These engineers are involved in areas as diverse as product development, advanced computer-based design, analysis of complex thermo-fluid systems, robotics, energy conservation, maintenance, decommissioning and engineering management.