- Smith, I.K. (2023). A note on power plant selection for engineered geothermal systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science pp. 95440622311668–95440622311668. doi:10.1177/09544062231166804.
- Rane, S., Kovačević, A., Stošić, N. and Smith, I. (2021). Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E). International Journal of Refrigeration, 121, pp. 313–326. doi:10.1016/j.ijrefrig.2020.10.022.
- Read, M.G., Stosic, N. and Smith, I.K. (2020). The Influence of Rotor Geometry on Power Transfer Between Rotors in Gerotor-Type Screw Compressors. Journal of Mechanical Design, 142(7). doi:10.1115/1.4045508.
- Read, M.G., Smith, I.K. and Stosic, N. (2017). Internally geared screw machines with ported end plates. IOP Conference Series: Materials Science and Engineering, 232, pp. 12058–12058. doi:10.1088/1757-899x/232/1/012058.
- Read, M.G., Smith, I.K. and Stosic, N. (2017). Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 57–69. doi:10.1177/0954408916679202.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2017). Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(1), pp. 3–3. doi:10.1177/0954408916685022.
- Read, M., Smith, I., Stosic, N. and Kovacevic, A. (2016). Comparison of Organic Rankine Cycle Systems under Varying Conditions Using Turbine and Twin-Screw Expanders. Energies, 9(8), pp. 614–614. doi:10.3390/en9080614.
- Read, M.G., Smith, I.K. and Stosic, N. (2015). Optimisation of two-stage screw expanders for waste heat recovery applications. IOP Conference Series: Materials Science and Engineering, 90, pp. 12058–12058. doi:10.1088/1757-899x/90/1/012058.
- Smith, I.K. and Stosic, N. (2015). Compressors and their Systems. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229(2), pp. 87–87. doi:10.1177/0954408915585044.
- Read, M., Smith, I. and Stosic, N. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems. Transactions - Geothermal Resources Council, 38, pp. 705–712.
- Read, M., Stosic, N. and Smith, I.K. (2014). Optimization of Screw Expanders for Power Recovery From Low-Grade Heat Sources. Energy Technology & Policy, 1(1), pp. 131–142. doi:10.1080/23317000.2014.969454.
- Chukanova, E., Stosic, N. and Kovacevic, A. (2013). Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant. Universal Journal of Engineering Science, 1(3), pp. 68–79. doi:10.13189/ujes.2013.010302.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2012). NUMERICAL AND EXPERIMENTAL RESEARCH IN HEAT TRANSFER TO SCREW COMPRESSOR ROTORS. Frontiers in Heat and Mass Transfer, 3(2). doi:10.5098/hmt.v3.2.3003.
- Smith, I.K., Mujic, E., Kovacevic, A. and Stosic, N. (2011). Noise generation and suppression in twin screw compressors machines. Proceedings of the IMechE, Part E: J. of Process Mechanical, 225 (2)(Special Issue), pp. 127–148. doi:10.1177/1464419311403875.
- Stosic, N., Smith, I., Kovacevic, A. and Mujic, E. (2011). Geometry of screw compressor rotors and their tools. Journal of Zhejiang University-SCIENCE A, Applied Physics & Engineering, 12(4), pp. 310–326.
- Smith, I.K. and Stosic, N. (2011). Guest editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 225(2), p. 81. doi:10.1177/0954408911408004.
- Stosic, N., Smith, I., Kovacevic, A. and Mujic, E. (2011). Review of Mathematical Models in Performance Calculation of Screw Compressors. International Journal of Fluid Machinery and Systems, 4(2).
- Kovacevic, A., Mujic, E., Stosic, N. and Smith, I. (2010). Extending the Role of Computational Fluid Dynamics in Screw Machines. Proc. IMechE, Part E: J. Process Mechanical Engineering, 225, pp. 1–15.
- Smith, I.K., Stosic, N., Kovacevic, A. and Mujic, E. (2009). Influencia de la forma del puerto de descarga en las prestaciones del compresor de tornillo y en las pulsaciones del gas. Frío-calor y aire acondicionado pp. 14–23.
- Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2008). The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 211–223. doi:10.1243/09544089jpme205.
- Guerrato, D., Nouri, J.M., Stosic, N., Arcoumanis, C. and Smith, I.K. (2008). Flow measurements in the discharge port of a screw compressor. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. 201–210. doi:10.1243/09544089jpme200.
- Smith, I.K., Mujic, E., Kovacevic, A. and Stosic, N. (2008). The Influence of Port Shape on Gas Pulsations in a Screw Compressor Discharge Chamber. Journal of Process Mechanical Engineering, Part E, 222, pp. 211–223.
- Smith, I.K., Guerrato, D., Nouri, J.M., Arcoumanis, C. and Stosic, N. (2008). Flow Measurements in the Discharge Port of a Screw Compressor. Journal of Process Mechanical Engineering, Part E, 222, pp. 201–210. doi:10.1243/09544089JPME200.
- Smith, I.K. and Stosic, N. (2008). Guest Editorial. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4), pp. i–i. doi:10.1177/095440890822200401.
- Smith, I.K. and Stosic, N. (2008). Special isssue on compressors and their systems. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222(4).
- Smith, I.K., Stosic, N., Kovacevic, A. and Langson, R. (2007). Cost effective small scale ORC systems for power recovery from low enthalpy geothermal resources. Transactions - Geothermal Resources Council, 31, pp. 529–534.
- Smith, I.K., Kovacevic, A., Mujic, E. and Stosic, N. (2007). CFD Integrated Design of Screw Compressors. Journal of Engineering Applications of CFM, 1 (2), pp. 96–108.
- Smith, I.K., Kovacevic, A. and Stosic, N. (2006). Numerical simulation of combined screw compressor-expander machines for use in high pressure refrigeration systems. Journal of Simulation Modelling Practice and Theory, 14(8), pp. 1143–1154.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2005). Screw expanders increase output and decrease the cost of geothermal binary power plant systems. Transactions - Geothermal Resources Council, 29, pp. 787–794.
- Smith, I.K., Alagic, S., Kovacevic, A. and Buljubasic, I. (2005). A Numerical Analysis of Heat Transfer and Fluid Flow in Rotary Regenerative Air Pre-Heaters. Strojniški Vestnik: Journal of Mechanical Engineering, 51(7-8), pp. 411–417.
- Smith, I.K., Stosic, N. and Kovačević, A. (2004). Multifunctional Screw Machines. Mašinstvo Journal, Zenica, 8(1), pp. 3–16.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2004). A numerical study of fluid?solid interaction in screw compressors. International Journal of Computer Applications in Technology, 21(4), pp. 148–148. doi:10.1504/ijcat.2004.006651.
- Smith, I.K., Kovačević, A. and Stosic, N. (2004). A Numerical Study of Fluid – Solid Interaction in Screw Compressors. International Journal on Computer Application in Technology, 24(1), pp. 148–158.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2003). Opportunities for innovation with screw compressors. Proceedings of the I MECH E Part E Journal of Process Mechanical Engineering, 217(3), pp. 157–170. doi:10.1243/095440803322328836.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2003). Optimisation of screw compressors. Applied Thermal Engineering, 23(10), pp. 1177–1195. doi:10.1016/S1359-4311(03)00059-0.
- Stosic, N., Smith, I. and Kovacevic, A. (2003). Rotor interference as a criterion for screw compressor design. Journal of Engineering Design, 14(2), pp. 209–220. doi:10.1080/0954482031000091518.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computational Methods in Sciences and Engineering, 3(2), pp. 259–284. doi:10.3233/jcm-2003-3206.
- Smith, I.K., Stosic, N. and Kovačević, A. (2003). The Design of Efficient Air Screw Compressors. Mašinstvo Journal, Zenica, 7(1), pp. 12–26.
- Smith, I.K., Kovačević, A. and Stosic, N. (2003). Three Dimensional Numerical Analysis of Screw Compressor Performance. Journal of Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 259–284.
- Smith, I.K., Stosic, N. and Kovačević, A. (2003). Optimisation of Screw Compressors. Applied Thermal Engineering, 23, pp. 1177–1195.
- Smith, I.K., Stosic, N., Kovačević, A. and Mc Creith, I. (2003). Proektirovanie effektivniih vintoviih kompressorov dlia podachi suhogo vazduha. Compressors and Pneumatics, 1, pp. 2–5.
- Smith, I.K., Madhav, K.V., Stosic, N. and Kovačević, A. (2003). Proektirovanie semeistva maslozapolneniih vintoviih kompressorov. Compressors and Pneumatics, 1, pp. 2–5.
- Smith, I.K., Stosic, N. and Kovačević, A. (2003). Opportunities for Innovation with Screw Compressors. Proceedings of IMechE, Journal of Process Mechanical Engineering, 217, pp. 157–170.
- Smith, I.K., Stosic, N. and Kovačević, N. (2003). Rotor Interference as a Criterion for Screw Compressors Design. Journal of Engineering Design, 14(2), pp. 209–220.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2002). Screw compressor: A strong link in the development chain. Tehnicki Vjesnik, 9(3-4), pp. 39–44.
- Smith, I.K., Stosic, N. and Kovačević, A. (2002). Screw Compressor: A Strong Link in The Development Chain. Technical Gazette, Slavonski Brod, 9(3,4), pp. 41–46.
- Smith, I.K., Stošić, N. and Kovačević, A. (2001). Twin screw machines to replace throttle valves in refrigeration systems. Strojniski Vestnik/Journal of Mechanical Engineering, 47(8), pp. 484–490.
- Smith, I.K., Stosic, N. and Kovačević, A. (2001). Twin Screw Machines to replace Throttle Valve in Refrigeration Systems. Strojniški Vestnik: Journal of Mechanical Engineering, 4, p. 484.
- Stosic, N., Kovačević, A. and Smith, I.K. (2000). Design of Oil-Less Helical Twin Screw Machines. Mašinstvo Journal, Zenica, 3(4), pp. 171–180.
- Smith, I.K., Stosic, N. and Kovačević, A. (2000). Design of Oil-Less Helical Twin Screw Machines. Mašinstvo Journal, Zenica, 3(4), pp. 171–180.
- STOŠIĆ, N., SMITH, I.K., KOVAČEVIĆ, A. and ALDIS, C.A. (1997). The Design of a Twin-screw Compressor Based on a New Rotor Profile. Journal of Engineering Design, 8(4), pp. 389–399. doi:10.1080/09544829708907973.
- Smith, I.K., Stosic, N., Kovačević, A. and Aldis, C.A. (1997). The Design of a Twin-screw Compressor Based on a New Rotor Profile. Journal of Engineering Design, 8(4), pp. 389–399.
- Smith, I.K., Stoisic, N., Kovačević, A. and Aldis, C.A. (1997). An Application of 'N' Rotors in an Oil Flooded Screw Compressor. 'Mašinstvo' Journal of Mechanical Engineering, Zenica, 1(1), pp. 3–11.
- Stosic, N., Smith, I.K., Kovačević, A. and Aldis, C.A. (1997). The Design of a Twin-screw Compressor Based on a New Rotor Profile. Mašinstvo Journal, Zenica, 1(1), pp. 1–9.
- Smith, I.K., Stosic, N., Kovačević, A. and Aldis, C.A. (1997). The Design of a Twin-screw Compressor Based on a New Rotor Profile. Mašinstvo Journal, Zenica, 1(1), pp. 1–9.
- Smith, I.K., Stošič, N. and Aldis, C.A. (1996). Development of the Trilateral Flash Cycle System: Part 3: The Design of High-Efficiency Two-Phase Screw Expanders. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 210(1), pp. 75–93. doi:10.1243/pime_proc_1996_210_010_02.
- Al-Hussaini, H. and Smith, I.K. (1995). Enhancing of solar still productivity using vacuum technology. Energy Conversion and Management, 36(11), pp. 1047–1051. doi:10.1016/0196-8904(95)00003-v.
- Smith, I.K., Harrison, H.R. and Cox, M. (1992). A preliminary evaluation of the Groll rotary vane compressor. International Journal of Refrigeration, 15(2), pp. 69–73. doi:10.1016/0140-7007(92)90029-t.
- Smith, I.K. (1991). Developments in Compression and Expansion. Proc Inst Refrig, 88.
- Smith, I.K. (1986). Power from low grade heat sources: The Kalina Cycle. CME, 33(1).
- Smith, I.K. and Martin, P.R. (1985). Power from low grade heat sources: Project SPHERE: an evaluation of the Trilateral Wet Vapour Cycle. CME, 32(1).
- Smith, I.K. (1982). Power recovery from low grade heat. Industrial Energy.
- Smith, I.K. and Tiefenbrunner, E.B. (1981). The measurement of organic fluid thermal properties. Tran IMechE Part C, 93(C71).
- Smith, I.K. and Abubaker, M. (1981). Heat exchanger design for organic fluid power plant. Tran IMarE (C), 93(C73).
- Smith, I.K., Musgrave, G., Kelly, O., Sherlock, J. and Wilson, S.S. (1980). The TIGER project: A proposal for utilising industrial waste heat. Journal of the Energy Institute, vLIII(416).
- Smith, I.K. and Garmendia, L.A. (1979). The effects of an electrostatic field and air stream on water spray droplet size. Transactions of the Institution of Chemical Engineers.
- Garmendia, L.A. and Smith, I.K. (1975). The effects of an electrostatic field and air stream on water jet break-up length. The Canadian Journal of Chemical Engineering, 53(6), pp. 606–610. doi:10.1002/cjce.5450530604.
- Smith, I.K. (1975). The effects of an electrostatic field and air stream on water jet spray angle. Transactions of the Institution of Chemical Engineers, v57, 1975.
Contact details
Address
Northampton Square
London EC1V 0HB
United Kingdom
About
Overview
Ian Smith has been a member of the academic staff since 1962 and currently holds the position of Professor of Applied Thermodynamics in the Department of Mechanical Engineering. He received the degree of BSc in Mechanical Engineering at the University of Cape Town, following which he obtained a diploma in Gas Turbine Technology at Imperial College, London, a PhD from the University of London and, more recently, the degree of DSc from City, University of London. Prior to coming to City, he spent three years in the aircraft gas turbine industry.
Since his appointment at City, he pioneered the first MSc course in the Department of Mechanical Engineering and initiated research in the recovery of power from low grade heat sources, which has been his main field of interest and in which he is an acknowledged expert. Resulting from this, he formed the Centre for Positive Displacement Compressor Technology in 1995, together with Professor Nikola Stosic, and this is now recognised as an international centre of excellence in twin screw machines. As a result of his and Nikola Stosic’s work in this area, Heliex Power Ltd, a spin out company was formed to commercialise their work in 2009.
Ian has over 190 publications, including three monographs and nine patents. He has also received 12 professional awards and prizes, including the Institution of Marine Engineers Silver Medal and the highly prestigious James Clayton Prize from the Institution of Mechanical Engineers. He is a fellow of the Royal Academy of Engineering and the Institution of Mechanical Engineers.
Qualifications
- DSc, City University London, London, United Kingdom, Jan 1963 – Jan 2017
- PhD, University of London, United Kingdom, Jan 1961
- Diploma of Imperial College, Imperial College London, United Kingdom, Jan 1961
- BSc(Eng), University of Cape Town,, South Africa, Nov 1953
Employment
- Professor of Applied Thermodynamics, City University London, London, Mar 1993 – present
- Reader in Mechanical Engineering, City University London, London, Mar 1983 – Mar 1993
- Visiting Professor, Ben-Gurion University of the Negev, Beersheba, Oct – Dec 1981
- Visiting Professor, Universitad del Zulia, Nov – Dec 1976
- Senior Lecturer, City University London, London, Mar 1972 – Mar 1983
- Head of Thermodynamics, National Physical Laboratory of Israel, Jan – Dec 1967
- Lecturer in Mechanical Engineering, City University London, London, Sep 1962 – Mar 1972
- Senior Performance Engineer, Lucas Gas Turbine Equipment, Jan 1960 – Sep 1962
- Technical Assitant, Armstrong Siddley Motors, Jul 1954 – Sep 1955
Fellowships
- Fellow (FREng), Royal Academy of Engineering, 2016 – present
- Fellow (FIMechE), Institution of Mechanical Engineers, 1982 – present
Memberships of committees
- Chairman, Organising Committee for biennial International Conference on Compressors and their Systems, 2010 – 2013
Awards
- Institute of Mechanical Engineers (IMechE) (2006) James Clayton Prize
- Geothermal Resources Council, California, USA (2004) 2004 Geothermal Resources Council Best paper
Geothermal Resources Council Best paper, California, USA, for paper "An Improved System for Power Recovery from Higher Enthalpy Liquid Dominated Fields" with I.K. Smith and N. Stosic - Institute of Marine Engineers (IMarE) (1981) Silver Medal
- IMechE, ASME and the GRC (Geothermal Resources Council, USA) 1982-2011 Eleven other prizes and awards for published papers
Expertise
Geographic Areas
- Europe
Publications
Featured publications
- Stosic, N. and Smith, I.K. (1995). The Expressor: An Efficiency Boost to Vapour Compression Systems by Power Recovery from the Throttling Process. ASME Congress November, San Francisco.
- Smith, I.K., Branover, H. and Yakhot, A. (1982). Performance studies on Two-phase low temperature liquid metal MHD Systems.
- Smith, I.K. (1978). The use of the Lee and Kesler equations of state for the estimation of common refrigerant properties. Proc NPL Conf: Chemical Thermodynamic Data on Fluids & Fluid Mixtures. NPL Teddington Teddington.
- Stosic, N., Smith, I. and Mujic, E. (2011). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders. Proceedings of the IMechE, Part E: J. of Process Mechanical Engineering, Special Issue, 225(2), pp. 117–126.
- Smith, I.K., Stosic, N. and Aldis, C. (1996). Development of Trilateral Flash Cycle System: Part 3. The Design of High Efficiency Two-Phase Screw Expanders. IMechE Journal for Power and Energy, 210, pp. 75–93.
- Smith, I.K. and Pitanga Marques da Silva, R. (1994). Development of Trilateral Flash Cycle System: Part 2. Increasing Power Output with Working Fluid Mixtures. IMechE Journal for Power and Energy, 208, pp. 135–144.
- Smith, I.K. (1993). Development of Trilateral Flash Cycle System: Part 1. Fundamental Considerations. IMechE Journal for Power and Energy, 207, pp. 179–194.
- Smith, I.K. (1992). Matching and Work Ratio in Elementary Thermal Power Plant Theory. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 206(4), pp. 257–262. doi:10.1243/pime_proc_1992_206_042_02.
- Smith, I.K. (1981). The choice of working fluids for power recovery from waste heat streams. Trans IMarE (C), 93(C70).
- Smith, I.K. (1969). The Supersonic Aerothermopressor. Proceedings of the Institution of Mechanical Engineers, 184(1), pp. 121–132. doi:10.1243/pime_proc_1969_184_014_02.
Publications by category
Books (3)
- Smith, I.K., Stosic, N. and Kovacevic, A. (2014). Power Recovery from Low Grade Heat by Means of Screw Expanders. ISBN 978-1-78242-189-4.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2006). Screw Compressors: Three Dimensional Computational Fluid Dynamics and Solid Fluid Interaction Effects. Berlin: Springer Verlag. ISBN 3-540-36302-5.
- Stosic, N., Kovacevic, A. and Smith, I.K. (2005). Screw Compressors: Mathematical Modeling and Performance Calculation. Berlin: Springer Verlag. ISBN 3-540-24275-9.
Chapters (7)
- Stosic, N., Smith, I.K. and Kovacevic, A. (2019). Screw compressors and expanders. Positive Displacement Machines (pp. 115–142). Elsevier.
- Read, M., Stosic, N. and Smith, I. (2017). Operational Characteristics of Internally Geared Positive Displacement Screw Machines. American Society of Mechanical Engineers.
- Smith, I.K. (2016). Total Flow and other Systems involving Two-Phase Expansion. In DiPippo, R. (Ed.), Geothermal Power Generation - Developments and Innovations. (pp. 321–352). UK: Woodhead publishing series in energy. ISBN 978-0-08-100337-4.
- Smith, I.K. (1994). Power Plant Cycles and Processes. In Crook, A.W. (Ed.), Profiting from Low Grade Heat Thermodynamic Cycles for Low-Temperature Heat Sources. The Watt Committee on Energy, Report No 26. (pp. 32–61). London, UK: The Institution of Electrical Engineers. ISBN 978-0-85296-835-2.
- Smith, I.K. (1994). Working Fluid Selection for Power Generation. In Crook, A.W. (Ed.), Profiting from Low Grade Heat Thermodynamic Cycles for Low-Temperature Heat Sources. The Watt Committee on Energy, Report No 26. (pp. 67–74). London, UK: The Institution of Electrical Engineers. ISBN 978-0-85296-835-2.
- Smith, I.K. (1994). Existing Installations. In Crook, A.W. (Ed.), Profiting from Low Grade Heat Thermodynamic Cycles for Low-Temperature Heat Sources. The Watt Committee on Energy, Report No 26. (pp. 90–98). London, UK: The Institution of Electrical Engineers. ISBN 978-0-85296-835-2.
- Mujić, E., Kovačević, A., Stošić, N. and Smith, I.K. Noise Control by Suppression of Gas Pulsation in Screw Compressors. Advances in Noise Analysis, Mitigation and Control InTech.
Conference papers and proceedings (135)
- Stosic, N., Smith, I. and Kovacevic, A. (2019). Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth. doi:10.1088/1757-899x/604/1/011012
- Read, M.G., Smith, I.K. and Stosic, N. (2019). Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines. doi:10.1088/1757-899x/604/1/011011
- Abdan, S., Stosic, N., Kovacevic, A., Smith, I. and Asati, N. (2019). Analysis of rolling bearing power loss models for twin screw oil injected compressor. doi:10.1088/1757-899x/604/1/012013
- Smith, I.K., Stosic, N. and Read, (2016). Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems. 23rd International Compressor Engineering Conference at Purdue 11 Jul 2017 – 14 Jul 2016, West Lafayette, Indiana.
- Read, M., Stosic, N. and Smith, I. (2017). Geometrical aspects of novel internally geared screw machine.
- Read, M.G., Smith, I.K. and Stosic, N. (2016). Optimisation of Power Plant Operating on Waste Heat of Gas IC Engine Driven Power Generator. ASME 2016 International Mechanical Engineering Congress and Exposition 11-17 November. doi:10.1115/imece2016-66550
- Stosic, N., Rane, S., Kovacevic, A. and Smith, I.K. (2016). Screw rotor profiles of variable lead vacuum and multiphase machines and their calculation models. doi:10.1115/IMECE201666314
- Read, , Smith, I.K. and Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. 3rd International Seminar on ORC Power Systems 12-14 October, Brussels, Belgium.
- Read, M.G., Smith, I.K. and Stosic, N. (2014). Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders. 22nd International Compressor Engineering Conference 14-17 July, Purdue.
- Read, M., Stosic, N. and Smith, I.K. (2014). Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems.
- Smith, I.K., Stosic, N. and Read, M. (2013). Optimisation of Screw Expanders for Power Recovery from Low Grade Heat Sources. ASME 2013 International Mechanical Engineering Congress & Exposition IMECE2013 13-21 November, San Diego, USA.
- Smith, I.K., Dhunput, A. and Kovacevic, A. (2012). Use of New Generation Instruments in Measurement of New Steam Expander. Purdue Compressor Technology Conference July, Lafayette, IN.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2011). Numerical and experimental research in heat transfer to screw compressor rotors. the ASME/JSME 2011 8th Thermal Engineering Joint Conference AJTEC2011 13-17 July, Honolulu, Hawaii, USA.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2011). Numerical and Experimental Research in Heat Transfer to Screw Compressor Rotors. ASME/JSME 2011 8th Thermal Engineering Joint Conference 13-17 March. doi:10.1115/ajtec2011-44255
- Kovacevic, A., Stosic, N., Mujic, E., Smith, I.K. and Guerrato, D. (2011). Extending the role of computational fluid dynamics in screw machines. doi:10.1177/0954408910397586
- Kethidi, M., Kovacevic, A., Stosic, N. and Smith, I.K. (2011). Evaluation of various turbulence models in predicting screw compressor flow processes by CFD. doi:10.1533/9780857095350.8.347
- Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2010). Development of Water Lubricated Compressor-Expander for Fuel Cell Application. ASME 2010 International Mechanical Engineering Congress and Exposition 12-18 November. doi:10.1115/imece2010-37437
- Smith, I.K., Stosic, N. and Kovacevic, A. (2010). Development of Water Lubruicated Compressor Expander for Fuel Cell Application. ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010-37437 12-18 November, Vancouver, British Columbia, Canada.
- Kovacevic, A., Mujic, E., Smith, I.K., Stosic, N. and Kethidi, M. (2010). Turbulence Capture in CFD for Screw Machines. Conference on Screw Type Machines VDI-Schraubenmachinen October, Dortmund, Germany.
- Smith, I.K., Kovacevic, A., Stosic, N., Mujic, E. and Kethidi, M. (2010). Turbulence Capture in CFD for Screw Machines. Conference on Screw Type Machines VDI-Schraubenmachinen October, Dortmund, Germany.
- Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2010). Advanced Design Environment for Screw Machines. 20th International Compressor Engineering Conference at Purdue July.
- Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2010). Extending the Role of Computational Fluid Dynamics in Screw Machines. 20th International Compressor Engineering Conference at Purdue July.
- Smith, I.K., Kovacevic, A., Stosic, N. and Mujic, E. (2010). Advanced Design Environment for Screw Machines. 20th International Compressor Engineering Conference at Purdue July, Lafayette, IN, USA.
- Smith, I.K., Stosic, N., Kovacevic, A. and Mujic, E. (2010). Three Decades of Modern Practice in Screw Compressors. 20th International Compressor Engineering Conference at Purdue July, Lafayette, IN, USA.
- Smith, I.K., Stosic, N., Kovacevic, A. and Mujic, E. (2010). Extending the Role of Computational Fluid Dynamics in Screw Machines. 20th International Compressor Engineering Conference at Purdue July, Lafayette, IN, USA.
- Smith, I.K., Stosic, N., Kovacevic, A. and Mujic, E. (2010). Research in Water Lubricated Screw Compressors for Fuel Cell Aplication. FC Expo, Academic Forum March, Tokyo.
- Nouri, J.M., Guerrato D., , Stosic N., , Smith, I. and Arcoumanis, C. (2009). Turbulent flow measurements within a screw compressor. 6th Int. Symposium on Turbulence, Heat and Mass Transfer THMT 14-18 September, Rome, Italy.
- Smith, I.K., Stosic, N., Mujic, E., Kovacevic, A. and Okezue, C. (2009). Overview of Methods used for the Analysis of Multiphase Flows in Positive Displacement Machines. International Conference on Compressors and Their Systems 7-9 September, London.
- Smith, I.K., Stosic, N., Kovacevic, A., Leyderman, A. and Delash, T. (2009). Rotor Retrofit for Better Screw Compressor Performance in Refrigeraion and Air Conditioning. International Conference on Compressors and Their Systems 7-9 September, London.
- Smith, I.K., Stosic, N., Kovacevic, A., Mujic, E. and Guerrato, D. (2009). Extending the Role of Computational Fluid Dynamics in Screw Machines. International Conference on Compressors and Their Systems 7-9 September, London.
- Smith, I.K., Kovacevic, A., Stosic, N. and Mujic, E. (2009). Numerical Modelling of Gas Pulsations in a Screw Compressor. International Conference on Compressors and Their Systems 7-9 September, London.
- Smith, I.K., Kovacevic, A. and Stosic, N. (2009). Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders. International Conference on Compressors and Their Systems 7-9 September, London.
- Okezue, C., Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2009). Overview of methods used for the analysis of multiphase flows in positive displacement screw machines.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2009). Steam as the working fluid for power recovery from exhaust gases by means of screw expanders.
- Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2009). Numerical modelling of gas pulsations in a screw compressor.
- Delash, T., Leyderman, A.D., Stosic, N., Smith, I.K. and Kovacevic, A. (2009). Rotor retrofit for better screw compressor performance in refrigeration and air conditioning.
- Kovacevic, A., Stosic, N., Mujic, E., Smith, I.K. and Guerrato, D. (2009). Extending the role of computational fluid dynamics in screw machines.
- Smith, I.K. and Stosic, N. (2009). Cost Effective Small Systems for Power Recovery from Low-Grade Heat Sources.
- Stosic, N. and Smith, I.K. (2008). Utilization of Expansion Work in Transcritical CO2 Heat Pumps in Combined Heating and Cooling. ASME 2008 International Mechanical Engineering Congress and Exposition 31 Oct 2008 – 6 Nov 2008. doi:10.1115/imece2008-68722
- Smith, I.K. and Stosic, N. (2008). Utilization of Expansion Work in Transcritical CO2 Heat Pumps in Combined Heating and Cooling. 2008 ASME International Mechanical Engineering Congress and Exposition 31 Oct 2008 – 6 Nov 2008, Boston, Massachusetts, USA.
- Stosic, N., Kovacevic, A., Smith, I.K., Mujic, E. and Guerrato, D. (2008). Advances in Numerical and Experimental Investigation of Screw Compressors. International Conference on Compressor and Refrigeration September, Xian, China.
- Stosic, N., Kovacevic, A., Smith, I.K., Mujic, E. and Guerrato, D. (2008). Experimental Validation of CFD Calculations in Screw Compressors. IMechE Seminar ‘Computational Fluid Dynamics, how much is enough? September, London.
- Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2008). Geometry of Screw Compressor Rotors and Their Tools. International Conference on Compressor and Refrigeration September, Xian, China.
- Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2008). Reduction of Noise in Screw Compressors. 12th International Research/Expert Conference ‘Trends in the Development of Machinery and Associated Technology’, TMT 2008 26-30 August, Istanbul, Turkey.
- Stosic, N., Kovacevic, A., Smith, I.K. and Mujic, E. (2007). An Evaluation of Encapsulated Oil Flooded Screw Compressor Systems. ASME 2007 International Mechanical Engineering Congress and Exposition 11-15 November. doi:10.1115/imece2007-43027
- Guerrato, D., Nouri, J.M., Stošić, N., Arcoumanis, C. and Smith, I.K. (2007). Flow development in the discharge chamber of a screw compressor.
- Kovačević, A., Mujić, E., Stošić, N. and Smith, I.K. (2007). An integrated model for the performance calculation of screw machines.
- Stošić, N., Mujić, E., Smith, I.K. and Kovačević, A. (2007). Development of a rotor profile for silent screw compressor operation.
- Mujić, E., Kovačević, A., Stošić, N. and Smith, I.K. (2007). The influence of port shape on gas pulsations in a screw compressor discharge chamber.
- Stosic, N., Guerrato, D., Nouri, J.M. and Arcoumanis, C. (2007). Flow and Pressure Characteristics within Screw Compressor. Third International Conference on Optical & Laser Diagnostics (ICOLAD) London, England.
- Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2007). The Influence of Port Shape on Gas Pulsations in a Screw Compressor Discharge Chamber. International Conference Compressors and Their Systems London, England.
- Stosic, N., Guerrato, D., Nouri, J.M. and Arcoumanis, C. (2007). Flow Development through the Discharge Chamber of a Screw Compressor. International Conference Compressors and Their Systems London, England.
- Leibowitz, H., Smith, I.K. and Stosic, N. (2006). Cost Effective Small Scale ORC Systems for Power Recovery From Low Grade Heat Sources. ASME 2006 International Mechanical Engineering Congress and Exposition 5-10 November. doi:10.1115/imece2006-14284
- Nouri, J.M., Guerrato D., , Stosic N., and Kovacevic A., (2006). Cycle resolved velocity measurements within a screw compressor. 18th Int. Compressor Eng. Conf. 17-20 July, Purdue.
- Stosic, N., Wang, Z., Zhang, W., Kovacevic, A., Smith, I.K. and Mujic, E. (2006). New Design and Rotor Retrofit to Improve Capacity and Performance of Refrigeration Screw Compressors. 18th International Compressor Engineering Conference at Purdue July.
- Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2006). The Influence of Discharge Ports on Rotor Contact in Screw Compressors. 18th International Compressor Engineering Conference at Purdue July.
- Stosic, N., Kovačević, A., Smith, I.K. and Mujic, E. (2006). Advanced Methods and Tools for Screw Compressor Design. April, Ljubljana, Slovenia.
- Kovačević, A., Stošić, N. and Smith, I.K. (2006). Numerical simulation of combined screw compressor–expander machines for use in high pressure refrigeration systems. doi:10.1016/j.simpat.2006.09.004
- Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2006). Influence of thermal dilatation upon design of screw machines.
- Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2006). Vacuum and multiphase screw pump rotor profiles and their calculation models.
- Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2006). Influence of thermal dilatation upon design of screw machines.
- Leibowitz, H., Smith, I.K. and Stosic, N. (2006). Cost effective small scale ORC systems for power recovery from low grade heat sources. doi:10.1115/IMECE2006-14284
- Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2005). Design Integration for Screw Compressors. ASME 2005 International Mechanical Engineering Congress and Exposition 5-11 November. doi:10.1115/imece2005-79324
- Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2005). Analysis of Clearances in Combined Screw Machines. ASME 2005 International Mechanical Engineering Congress and Exposition 5-11 November. doi:10.1115/imece2005-79325
- Stosic, N., Smith, I.K. and Kovačević, A. (2005). Numerical Investigation of Heat Transfer on Screw Compressor Rotors. Mecom 2005, VIII Argentinian Congress on Computational Mechanics November, Buenos Aires.
- Stosic, N., Mujic, E., Smith, I.K. and Kovačević, A. (2005). Analysis and Measurement of Discharge Port Influence upon Screw Compressor Noise. 9th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology,TMT 2005 September, Antalya.
- Stosic, N., Smith, I.K., Kovačević, A. and Wei Min, Z. (2005). An Investigation of Liquid Injection in Refrigeration Screw Compressors. ICCR the 5th International Conference on Compressors and Refrigeration July, Dalian.
- Stosic, N., Smith, I.K. and Kovačević, A. (2005). An Improved System for Power Recovery from High Enthalpy Liquid Dominated Fields. World Geothermal Congress May, Antalya Turkey.
- Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2005). Clearance management in multifunctional screw machines.
- Stošić, N. (2005). Identification of constraints in the optimal generation of screw compressor rotors by the pressure angle method.
- Stošić, N., Smith, I.K., Kovačević, A., Kim, J.U. and Park, J. (2005). Improving screw compressor performance.
- Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2005). Noise prediction in screw compressors.
- Stosic, N. (2005). Tool wear and its compensation in screw rotor manufacturing.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2004). Estimation and Control of Heat Transfer in Screw Compressor Rotors. ASME 2004 International Mechanical Engineering Congress and Exposition 13-19 November. doi:10.1115/imece2004-60516
- Stosic, N., Smith, I.K. and Kovačević, A. (2004). Numerical Simulation of Combined Compressor Expander Machines for Use in High Pressure Refrigeration Systems. September, Technical University of Copenhagen.
- Stosic, N., Smith, I.K. and Kovačević, A. (2004). Extension of Operating Range of Dry Screw Compressors by Cooling of Their Rotors. 17th International Compressor Engineering Conference at Purdue July.
- Stosic, N., Smith, I.K. and Kovačević, A. (2004). Identification of Heat Transfer on Screw Compressor Rotors as Tool for Their Design. HEFAT 2004, 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 21-24 June, Cape Town, South Africa.
- Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2004). Development of the management interface for screw compressor design tools. 14 April, Lausanne , Switzerland.
- Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2004). Fluid-solid interaction in the design of multifunctional screw machines.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2004). An improved system for power recovery from higher enthalpy liquid dominated fields.
- Stosic, N., Smith, I.K. and Kovačević, A. (2003). Fluid-Solid Interaction for Extension of Range in Screw Machine Application. Advances of CFD in Fluid Machinery Design, ImechE Seminar 18 November, London.
- Stosic, N., Smith, I.K. and Kovačević, A. (2003). Combined Compressor-Expander in Fuel Cell Application. COBEM 2003, 17th International Congress of Mechanical Engineers 10-14 November, Sao Paulo.
- Stosic, N., Smith, I.K. and Kovačević, A. (2005). Multifunctional Screw Compressor Rotors. ICCR the 4th International Conference on Compressors and Refrigeration, Xi 21 Oct 2003 – 25 Oct 2005.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2003). Improving refrigeration screw compressor performance with optimized rotors. 8-10 September, London, England.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2003). The application of CFD analysis to the design of bi-functional screw machines. 8-10 September, London, England.
- Stosic, N., Kovačević, A., Smith, I.K. and Mujić, E. (2003). Advanced Design Tools for Screw Compressors. 2nd DAAAM International Conference on Advanced Technologies for Developing Countries,ATDC03 25-28 June, Tuzla, Bosnia and Herzegovina.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2003). Optimisation of screw compressors. doi:10.1016/s1359-4311(03)00059-0
- Stosic, N., Smith, I.K. and Kovacevic, A. (2003). Combined screw compressor-expander in fuel cell application.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2002). Numerical Simulation of Fluid Flow and Solid Structure in Screw Compressors. ASME 2002 International Mechanical Engineering Congress and Exposition 17-22 November. doi:10.1115/imece2002-33367
- Stosic, N., Smith, I.K. and Kovačević, A. (2002). Optimization of Screw Compressor Design. VIII European Congress on Fluid Machinery for the Oil, Gas and Petrochemical Industry October.
- Stosic, N., Smith, I.K. and Kovačević, A. (2002). Screw Compressor: A Strong Link in the Development Chain. International Conference on Advanced Technologies for Developing Countries 12-14 September, Slavonski Brod, Croatia.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2002). Three-dimensional modelling of solid fluid interaction as a design tool in screw compressors. 14-17 May, Dubrovnik.
- Kovacevic, A., Stosic, N. and Smith, I. (2002). The influence of rotor deflection upon screw compressor performance.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2002). Numerical simulation of fluid flow and solid structure in screw compressors.
- Stosic, N., Smith, I.K. and Kovačević, A. (2002). A Twin Screw Combined Compressor and Expander for CO2 Refrigeration Systems. XVI International Compressor Engineering Conference at Purdue JUL 2002.
- Stosic, N., Smith, I.K. and Kovačević, A. (2002). Solid-Fluid Interaction in Screw Compressors. XVI International Compressor Engineering Conference at Purdue JUL 2002.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2002). Optimization of Screw Compressor Design. USA.
- Stosic, N., Kovačević, A. and Smith, I.K. (2001). The design of efficient Screw Air Compressors. 3rd Symposium 'Revitalization and Modernization of Metal Industry in B&H October, Bihać, Bosnia and Herzegovina.
- Smith, I.K., Stosic, N. and Kovacevic, A. (2001). A feasibility study of throttle loss power recovery in large heat pumps with two stage compression. September, London, England.
- McCreath, P., Stosic, N., Smith, I.K. and Kovacevic, A. (2001). The design of efficient screw compressors for delivery of dry air. September, London, England.
- Stosic, N. and Smith, I.K. (2001). Prospects for Energy Conversion Efficiency Improvements by the Use of Two-Phase Expanders. 2nd International Heat Powered Cycles Conference September, Paris.
- Stosic, N., Kovačević, A. and Smith, I.K. (2001). Power Recovery From Low Cost Two-Phase Expanders. Geothermal Research Council 2001 Annual Meeting August, San Diego, CA.
- Stosic, N., Kovačević, A. and Smith, I.K. (2001). Rotor Interference as a Criterion in a Screw Compressors Design. ICTC, International Compressor Technique Conference August, Wuxi, China.
- Stosic, N., Kovačević, A. and Smith, I.K. (2001). CFD Analysis of a Screw Compressor Performance. IMechE Symposium “Advances of CFD in Fluid Machinery Design” June.
- Madhav, K.V., Stosic, N., Smith, I.K. and Kovacevic, A. (2001). The design of a family of screw compressors for oil-flooded operation.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2001). Analysis of screw compressor performance by means of three-dimensional numerical modelling.
- Stosic, N., Kovačević, A., Smith, I.K. and Venumadhav, K. (2001). Retrofit of 'N' Rotors for Efficient oil-Flooded Screw Compressors. 2000 International Compressor Engineering Confereence at Purdue, Lafayette, IN, USA, July 2000, also ICTC, International Compressor Technique Conference, Wuxi, China, August 2001.
- Stosic, N., Brasz, J.J. and Smith, I.K. (2000). Development of a Twin Screw Expressor as a Throttle Valve Replacement for Water-Cooled Chillers. 2000 International Compressor Engineering Confereence at Purdue July, Lafayette, IN, USA.
- Stosic, N., Kovaćević, A. and Smith, I.K. (2000). The CFD Analysis of a Screw Compressor Suction Flow. 2000 International Compressor Engineering Confereence at Purdue July, Lafayette, IN, USA.
- Stosic, N., Smith, I.K. and Kovačević, A. (2000). Twin Screw Machines to replace Throttle Valve in Refrigeration Systems,. ASME - ZSITS International Thermal Science Seminar June, Bled, Slovenia.
- Stosic, N., Smith, I.K. and Kovacevic, A. (2000). Design of oil-less helical twin screw machines. May, Dubrovnik, Croatia.
- Kovacevic, A., Stosic, N. and Smith, I.K. (2000). Grid aspects of screw compressor flow calculations.
- Kovacevic, A., Stosic, N. and Smith, I.K. (1999). Development of CAD-CFD interface for screw compressor design. September, London, England.
- Smith, I.K., Stosic, N., Aldis, C.A. and Kovacevic, A. (1999). Twin screw two-phase expanders in large chiller units. September, London, England.
- Stosic, N. and Smith, I.K. (1999). Rewiev of the Development of Two-Phase Screw Expanders. September, London, England.
- Stosic, N., Kovačević, A. and Smith, I.K. (1998). Modelling of Screw Compressor Capacity Control. 1998 International Compressor Engineering Confereence at Purdue July, Lafayette, IN, USA.
- Stosic, N., Smith, I.K. and Kovacevic, A. (1998). Some aspects of tool design for screw compressor rotor manufacturing. May, Dubrovnik, Croatia.
- Stošić, N., Smith, I.K., Brasz, J.J. and Sishtla, V. (1998). The performance of a screw compressor with involute contact rotors in a low viscosity gas-liquid mixture environment.
- Stosic, N., Smith, I.K. and Zagorac, S. (1996). CFD Studies of Flow in Screw and Scroll Compressors. XIII Int. Conf on Compressor Engineering July, Purdue.
- Stosic, N., Smith, I.K. and Aldis, C. (1995). The Trilateral Flash Cycle System A High Efficiency Power Plant for Liquid Resources. World Geothermal Conference May, Florance Italy.
- Stosic, N. and Smith, I.K. (1994). Lysholm Machines as Two-Phase Expanders. XII Int. Conf on Compressor Engineering July, Purdue.
- Smith, I.K., Stasiek, J., Ciofalo, M. and Collins, M.W. (1994). Experimental and analytical studies of fluid flow and heat transfer across corrugated-undulated heat exchanger surfaces. UK.
- Smith, I.K., Xu, Z.G. and Aldis, C.A. (1992). Local Void Fraction Measurement in Two-Phase Flow of Refrigerants by Optical Method. UK.
- Smith, I.K. (1992). Prospects of Two-Phase Expanders. Proc SRM Conf, Stockholm Sweden.
- Smith, I.K., Xu, Z.G. and Aldis, C.A. (1991). Local Void Fraction Measurement in Flow Channels of Irregular Shape. UK.
- Smith, I.K., Harrison, H.R. and Cox, M. (1990). A Preliminary Evaluation of the Groll Rotary Vane Compressor. USA.
- Smith, I.K. and Aldis, C.A. (1990). Lysholm Screw Expanders in place of Throttle Valves in Large Heat Pump and Refrigeration Systems. Sweden.
- Smith, I.K. (1989). The Trilateral Flash Cycle System for Power Recovery from Hot Dry Rock. UK.
- Smith, I.K. (1985). The Trilateral Wet Vapour Cycle System.
- Smith, I.K., Branover, H. and Yakhot, A. (1983). Development of a Low Temperature Liquid-metal MHD Small Scale Pilot Plant.
- Smith, I.K., Hirons, B. and Turtle, J. (1982). The conceptual design of a 4 MWe organic fluid power plant for a geothermal resource. Italy.
- Smith, I.K. (1981). The cost of power recovery from waste heat. Proc 3rd Int Conf on Future Energy Concepts. IEE, London.
- Smith, I.K., Musgrave, G., O'Kelly, D., Sherlock, J. and Wilson, J.J. (1981). Energy Recovery: A multidisciplinary approach and its ramifications related to industrial strategies.
- Abdan, S., Stosic, N., Kovacevic, A., Smith, I. and Deore, P. Identification and analysis of screw compressor mechanical losses.doi:10.1088/1757-899x/425/1/012015
- Basha, N., Kovacevic, A., Stosic, N. and Smith, I. Effect of oil-injection on twin screw compressor performance.doi:10.1088/1757-899x/425/1/012009
Journal articles (68)
Patents (9)
- REad, M.G., Stosic, N.R. and Smith, I.K. (2015). Internal Gear Expander.
- Smith, I.K. and Stosic, N.R. (2012). Extended Wet Steam Proposal GB1211242.1 25th June 2012 (Pending).
- Smith, I.K. and Stosic, N.R. (2008). 7. Generating Power from Medium Temperature Heat Sources GB0802315.2 7th February 2008 (Pending, Foreign applications Granted ).
- Smith, I.K. (2005). 5. New Cycle for power recovery from low grade heat WO2005/031123 7th April 2005.
- Smith, I.K. Converting Thermal Energy “Low Grade Flash” UK Patent No 82288295, 8th January 1986. Patent no. UK Patent No 82288295,
- Smith, I.K. 2. Utilisation of Thermal Energy “Rankine Flash”. Patent no. UK Patent No 8501461
- Smith, I.K. Plural Screw Positive Displacement Machines. Patent no. 9743550
- Smith, I.K. Deriving Mechanical Power by Expanding a Liquid to Its Vapour. Patent no. 9728354
- Smith, I.K. Expander Process Fluid Lubrication. Patent no. 0511864
Theses/dissertations (2)
- Rane, Grid Generation and CFD Analysis of Variable Geometry Screw Machines. (PhD Thesis)
- Smith, I.K. An investigation of the increase of total pressure of a hot gas stream by the injection of water. (PhD Thesis)
Professional activities
Editorial activity (2)
- IMechE Special Journal Issue on Compressors and their Systems, Co-Editor, 2010.
- IMechE Special Journal Issue on Compressors and their Systems, Co-Editor, 2008.