Dr Hamed Yazdani Nezhad • City, University of London

Contact details

Address

Dr Hamed Yazdani Nezhad City, University of London
Northampton Square
London EC1V 0HB
United Kingdom

About
Publications

About

Overview

Hamed is a senior lecturer (associate professor) in aerospace structures at the Department of Mechanical Engineering and Aeronautics at City, University of London. He has recently secured an EPSRC Joint Manufacturing Hubs grant on Contact-less Dielectric Process Monitoring (CDPM) of Composites Manufacturing (EPSRC Composites Manufacturing and EPSRC Metrology Hubs).
Hamed is a Fellow of Higher Education Academy, an associate member of the Institution of Mechanical Engineers as Charter Engineer, a member of the European Society for Composite Materials, and an academic member of the SAE Commercial Aircraft Composite Repair Committee.

Hamed received his PhD in mechanical engineering on a collaborative project between the University of Limerick, Imperial College London and Helmholtz-Zentrüm Berlin. He worked at the Irish Centre for Composites Research as a post-doctoral researcher on three consecutive projects on composites materials, MAAXIMUS project funded through EU FP7 grant agreement nº213371 led by Airbus (www.maaximus.eu), Design of Optimised Composites for Impact Applications (OPTCOM) project funded by Enterprise Ireland (grant CF/2013/3012B), and the Science Foundation Ireland funded FALCOM project (www.falcom.ie) on a novel adhesively bonded composite joining technology.

Hamed joined Cranfield University in UK in 2016 as assistant professor in Composite Engineering at the Enhanced Composites and Structures Centre, where he developed and led the Multifunctional Composites Joining, Modelling and Repair research group (www.cranfield.ac.uk/multicomp), and established a CPD/postgraduate module on aerospace Composites Integration Repair & Joining (www.cranfield.ac.uk/CIRJ).

He has been the principal investigator of the EPSRC New Investigator project on 'Self-Tuning Fibre-Reinforced Polymer Adaptive Nanocomposite (www.STRAINcomp.com)', Ref. EP/R016828/1, EPSRC DTP grant for 'Microstructural Study of Multifunctional Nanocomposites', Ref. EP/R513027/1, and the EPSRC Institutional Sponsorship Award for 'Dielectric Activated Resin Cure for Composite Repair (DARCRep)', Ref. EP/P511134/1. He has also led a H2020 European Regional Development Funded project, and numerous direct industrial sponsored projects.

Fellowships

Fellow, Higher Education Academy

Memberships of committees

Academic liaison, Search Results Web results AMS CACRC Commercial Aircraft Composite Repair Committee
Member, European Society for Composite Materials

Memberships of professional organisations

Chartered Engineer, IMechE: Institution of Mechanical Engineers

Publications

Publications by category

Books (2)

Nezhad, H.Y. and Thakur, V.K. (2023). Composites Assembly for High Performance Fastener-Less Structures. ISBN 978-1-83953-149-1.
(2016). Mechcomp2 2nd international conference of mechanics of composites. Società Editrice Esculapio. ISBN 978-88-7488-963-1.

Chapters (2)

Yazdani Nezhad, H. and Liddel, P. (2023). Key challenges and prospects of rapid cure composites material production. In Hameed, N., Peerzada, M., Salim, N. and Parameswaranpillai, J. (Eds.), Rapid Cure Composites Materials, Processing and Manufacturing Woodhead Publishing. ISBN 978-0-323-98337-2.
Baker, A.A. and Nezhad, H.Y. (2021). Adhesively bonded repairs to highly loaded structure. Adhesive Bonding (pp. 437–497). Elsevier.

Conference papers and proceedings (24)

Pearson, C., Hawi, S., Lira, C., Goel, S. and Yazdani Nezhad, H. (2022). Magnetic field assisted 3D printing of short carbon fibre-reinforced polymer composites.
Mishra, R., Li, D., Chianella, I., Goel, S. and Yazdani Nezhad, H. (2022). Electromagnetic field induced extrinsic strains in BaTiO3-epoxy nanocomposite: a contact-less mechanical property tailoring smart material. The 20th European Conference on Composite Materials Lausanne, Switzerland.
Li, D., James, S., Barrington, J., Ayre, D., Sloma, M., Lin, M.-.F. … Yazdani Nezhad, H. (2022). Remote Field Induced Response of Polymer Nanocomposites Embedded with Sur face-functionalised Dielectric Nanoparticles. The 20th European Conference on Composite Materials Lausanne, Switzerland.
Khaleque, T., Vagias, I., Skordos, A. and Yazdani Nezhad, H. (2022). Contactless Dielectric Process Monitoring (CDPM) of Polymer Composites Manufacturing. The 20th European Conference on Composite Materials Lausanne, Switzerland.
Deane, S., Avdelidis, N.P., Ibarra-Castanedo, C., Yazdani-Nezhad, H., Mackley, T., Maldague, X.P.V. … Tsourdos, A. (2020). Aircraft non-destructive testing using an unmanned aerial vehicle (Conference Presentation). Thermosense: Thermal Infrared Applications XLII 27 Apr 2020 – 1 May 2020.
Li, D., Prevost, R., Ayre, D., Yoosefinejad, A., Lotfian, S., Brennan, F. … Nezhad, H.Y. (2020). Development of damage tolerant composite laminates using ultra-thin interlaminar electrospun thermoplastic nanofibres.
Lotfian, S., Kumar, V.T., Giraudmaillet, C., Yoosefinejad, A., Brennan, F. and Nezhad, H.Y. (2020). Towards the use of electrospun piezoelectric nanofibre layers for enabling in-situ measurement in high performance composite laminates.
Li, D., Ayre, D. and Yazdani Nezhad, H. (2020). Electromagnetic Field Aided Microstructural Enhancement in Dielectric Polymer Nanocomposites. 23rd International Conference on Composite Structures & MECHCOMP6 Porto, Portugal.
An, D., Aria, I., Thakur, V.K., Cardenas, I. and Yazdani Nezhad, H. (2020). Scalable and Integrated Strain Sensing CNT Enabled Aerospace Composite Materials and Structures. 23rd International Conference on Composite Structures & MECHCOMP6 Porto, Portugal.
Nezhad, H.Y., Wang, X., Court, S.D., Thapa, B. and Erkoyuncu, J.A. (2020). Development of An Augmented Reality Equipped Composites Bonded Assembly and Repair for Aerospace Applications.
Deane, S., Avdelidis, N.P., Ibarra-Castanedo, C., Yazdani-Nezhad, H., Williamson, A., Zhang, H. … Tsourdos, A. (2019). Autonomous systems thermographic NDT of composite structures. Thermosense: Thermal Infrared Applications XLI 14-18 April.
Rahatekar, S., Li, W., Yazdani, H.N. and Koziol, K. (2019). Plasma-modified graphene for improved interfacial bonding of epoxy adhesives for the aerospace and automotive structures.
Urbina, S.R., Ayre, D. and Nezhad, H.Y. (2019). Effect of hygrothermal cycles on mechanical performance of composite adhesively bonded joints.
Hernandez, T.P.A., Mills, A.R. and Nezhad, H.Y. (2019). Comparative study of strain energy storage mechanisms between carbon fibre-reinforced PEEK and epoxy composites subjected to static and cyclic loading.
Deane, S., Avdelidis, N., Ibarra-Castanedo, C., Maldague, X., Tsourdos, A., williamson, A.A. … Zhang, H. (2019). Autonomous Systems Imaging of Aerospace Structures. 10th International Symposium on NDT in Aerospace (AeroNDT 2018) Dresden, Germany.
Hernandez, T., Mills, A. and Nezhad, H.Y. (2018). A design and manufacturing investigation of carbon fibre-reinforced PEEK and epoxy composite leaf spring components.
(2018). ICCS21. 21ST INTERNATIONAL CONFERENCE ON COMPOSITE STRUCTURES.
Nezhad, H.Y., Auffray, A., McCarthy, C.T. and O'Higgins, R. (2015). Impact damage response of carbon fibre-reinforced aerospace composite panels.
Sulley, J. and Bohan, M. (2012). Hot Isostatically Pressed (HIPed) Large Bore Valves for a Pressurised Water Reactor (PWR) Application. ASME 2012 Pressure Vessels and Piping Conference 15-19 July.
Nezhad, H.Y., O’Dowd, N.P., Davies, C.M., Nikbin, K.M. and Wimpory, R.C. (2011). Study of Creep Relaxation Behaviour of 316H Austenitic Steels Under Mechanically Induced Residual Stress. ASME 2011 Pressure Vessels and Piping Conference 17-21 July.
Yazdani Nezhad, H. and O’Dowd, N.P. (2010). Prediction of Transient Creep Response Under Combined Primary and Secondary Loading. ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference 18-22 July.
Nezhad, H.Y. and O'Dowd, N.P. (2010). The effect of combined residual and mechanical stress on creep relaxation.
Yazdani-Nejad, H. and Hadidi-Moud, S. (2008). Progressive crack propagation in Bi-material adhesive bonding.
An, D., Nourry, J., Gharavian, S., Thakur, V.K., Aria, I., Cardenas, I. … Yazdani Nezhad, H. Strain self-sensing tailoring in functionalised carbon nanotubes/epoxy nanocomposites in response to electrical resistance change measurement. 9th International Conference on Through-life Engineering Service Cranfield, UK.

Journal articles (32)

Li, D., Barrington, J., James, S., Ayre, D., Słoma, M., Lin, M.-.F. … Yazdani Nezhad, H. (2022). Electromagnetic field controlled domain wall displacement for induced strain tailoring in BaTiO3-epoxy nanocomposite. Scientific Reports, 12(1). doi:10.1038/s41598-022-11380-9.
Rout, S., Nayak, R.K., Patnaik, S.C. and Yazdani Nezhad, H. (2022). Development of Improved Flexural and Impact Performance of Kevlar/Carbon/Glass Fibers Reinforced Polymer Hybrid Composites. Journal of Composites Science, 6(9). doi:10.3390/jcs6090245.
Siwal, S.S., Sheoran, K., Mishra, K., Kaur, H., Saini, A.K., Saini, V. … Thakur, V.K. (2022). Novel synthesis methods and applications of MXene-based nanomaterials (MBNs) for hazardous pollutants degradation: Future perspectives. Chemosphere, 293, pp. 133542–133542. doi:10.1016/j.chemosphere.2022.133542.
Faisal, N.H., Ahmed, R., Sellami, N., Prathuru, A., Njuguna, J., Venturi, F. … Kamnis, S. (2022). Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced Engineering Materials. doi:10.1002/adem.202200171.
Bregar, T., An, D., Gharavian, S., Burda, M., Durazo-Cardenas, I., Thakur, V.K. … Nezhad, H.Y. (2021). Author Correction: Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints. Scientific Reports, 11(1). doi:10.1038/s41598-021-82918-6.
Hawi, S., Gharavian, S., Burda, M., Goel, S., Lotfian, S., Khaleque, T. … Nezhad, H.Y. (2021). Development of carbonaceous tin-based solder composite achieving unprecedented joint performance. Emergent Materials, 4(6), pp. 1679–1696. doi:10.1007/s42247-021-00337-9.
Mishra, R., Goel, S. and Yazdani Nezhad, H. (2021). Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites. Biomaterials and polymers horizon, 1(1), pp. 1–14.
[publisher’s website]
Liu, H., Du, W., Yazdani Nezhad, H., Starr, A. and Zhao, Y. (2021). A Dissection and Enhancement Technique for Combined Damage Characterisation in Composite Laminates using Laser-line Scanning Thermography. Composite Structures pp. 114168–114168. doi:10.1016/j.compstruct.2021.114168.
Khaleque, T., Zhang, X., Kumar Thakur, V., Aria, A.I. and Yazdani Nezhad, H. (2021). Tailoring of Thermo-Mechanical Properties of Hybrid Composite-Metal Bonded Joints. Polymers, 13(2), pp. 170–170. doi:10.3390/polym13020170.
Bregar, T., An, D., Gharavian, S., Burda, M., Durazo-Cardenas, I., Thakur, V.K. … Yazdani Nezhad, H. (2020). Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints. Scientific Reports, 10(1). doi:10.1038/s41598-020-74076-y.
Yazdani Nezhad, H. (2020). Aeronautical and Aerospace Book Review on Engineered Repairs of
Composite Structures. Aeronautical Journal, 124(1282), pp. 2061–2062. doi:10.1017/aer.2020.115.
[publisher’s website]
P. A. Hernandez, T., Mills, A.R. and Yazdani Nezhad, H. (2020). Shear Driven Deformation and Damage Mechanisms in High-performance Carbon Fibre-reinforced Thermoplastic and Toughened Thermoset Composites Subjected to High Strain Loading. Composite Structures pp. 113289–113289. doi:10.1016/j.compstruct.2020.113289.
Sharma, B., Thakur, S., Trache, D., Yazdani Nezhad, H. and Thakur, V.K. (2020). Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption. Nanomaterials, 10(8), pp. 1616–1616. doi:10.3390/nano10081616.
Deane, S., Avdelidis, N.P., Ibarra-Castanedo, C., Zhang, H., Nezhad, H.Y., Williamson, A.A. … Nooralishahi, P. (2020). Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites. Sensors, 20(12), pp. 3381–3381. doi:10.3390/s20123381.
Daminabo, S.C., Goel, S., Grammatikos, S.A., Nezhad, H.Y. and Thakur, V.K. (2020). Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials Today Chemistry, 16, pp. 100248–100248. doi:10.1016/j.mtchem.2020.100248.
An, D., Lotfian, S., Mesbah, D., Ayre, D., Yoosefinejad, A., Thakur, V.K. … Yazdani Nezhad, H. (2019). Ultra-thin electrospun nanofibers for development of damage-tolerant composite laminates. Materials Today Chemistry, 14, pp. 100202–100202. doi:10.1016/j.mtchem.2019.100202.
Liu, Y., Zhang, X., Lemanski, S., Nezhad, H.Y. and Ayre, D. (2019). Experimental and numerical study of process-induced defects and their effect on fatigue debonding in composite joints. International Journal of Fatigue, 125, pp. 47–57. doi:10.1016/j.ijfatigue.2019.03.033.
Deane, S., Avdelidis, N.P., Ibarra-Castanedo, C., Zhang, H., Yazdani Nezhad, H., Williamson, A.A. … Tsourdos, A. (2019). Application of NDT thermographic imaging of aerospace structures. Infrared Physics & Technology, 97, pp. 456–466. doi:10.1016/j.infrared.2019.02.002.
Sirikham, A., Zhao, Y., Nezhad, H.Y., Du, W. and Roy, R. (2019). Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography. IEEE Transactions on Industrial Informatics, 15(1), pp. 445–453. doi:10.1109/tii.2018.2878758.
Mgbemena, C.O., Li, D., Lin, M.-.F., Liddel, P.D., Katnam, K.B., Thakur, V.K. … Nezhad, H.Y. (2018). Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges. Composites Part A: Applied Science and Manufacturing, 115, pp. 88–103. doi:10.1016/j.compositesa.2018.09.012.
Liu, Y., Lemanski, S., Zhang, X., Ayre, D. and Nezhad, H.Y. (2018). A finite element study of fatigue crack propagation in single lap bonded joint with process-induced disbond. International Journal of Adhesion and Adhesives, 87, pp. 164–172. doi:10.1016/j.ijadhadh.2018.10.005.
Nezhad, H.Y. and Thakur, V.K. (2018). Effect of Morphological Changes due to Increasing Carbon Nanoparticles Content on the Quasi-Static Mechanical Response of Epoxy Resin. Polymers, 10(10), pp. 1106–1106. doi:10.3390/polym10101106.
Lotfian, S., Giraudmaillet, C., Yoosefinejad, A., Thakur, V.K. and Nezhad, H.Y. (2018). Electrospun Piezoelectric Polymer Nanofiber Layers for Enabling in Situ Measurement in High-Performance Composite Laminates. ACS Omega, 3(8), pp. 8891–8902. doi:10.1021/acsomega.8b00940.
Nezhad, H.Y., Stratakis, D., Ayre, D., Addepalli, S. and Zhao, Y. (2018). Mechanical performance of composite bonded joints in the presence of localised process-induced zero-thickness defects. Procedia Manufacturing, 16, pp. 91–98. doi:10.1016/j.promfg.2018.10.175.
Yazdani Nezhad, H., Egan, B., Merwick, F. and McCarthy, C.T. (2017). Bearing damage characteristics of fibre-reinforced countersunk composite bolted joints subjected to quasi-static shear loading. Composite Structures, 166, pp. 184–192. doi:10.1016/j.compstruct.2017.01.029.
Yazdani Nezhad, H., Zhao, Y., Liddel, P.D., Marchante, V. and Roy, R. (2017). A novel process-linked assembly failure model for adhesively bonded composite structures. CIRP Annals, 66(1), pp. 29–32. doi:10.1016/j.cirp.2017.04.103.
Bhanushali, R., Ayre, D. and Nezhad, H.Y. (2017). Tensile Response of Adhesively Bonded Composite-to-composite Single-lap Joints in the Presence of Bond Deficiency. Procedia CIRP, 59, pp. 139–143. doi:10.1016/j.procir.2016.09.021.
Zhou, Y., Yazdani Nezhad, H., Hou, C., Wan, X., McCarthy, C.T. and McCarthy, M.A. (2015). A three dimensional implicit finite element damage model and its application to single-lap multi-bolt composite joints with variable clearance. Composite Structures, 131, pp. 1060–1072. doi:10.1016/j.compstruct.2015.06.073.
Yazdani Nezhad, H. and O’Dowd, N.P. (2015). Creep relaxation in the presence of residual stress. Engineering Fracture Mechanics, 138, pp. 250–264. doi:10.1016/j.engfracmech.2015.03.037.
Nezhad, H.Y., Merwick, F., Frizzell, R.M. and McCarthy, C.T. (2015). Numerical analysis of low-velocity rigid-body impact response of composite panels. International Journal of Crashworthiness, 20(1), pp. 27–43. doi:10.1080/13588265.2014.963378.
Zhou, Y., Yazdani-Nezhad, H., McCarthy, M.A., Wan, X. and McCarthy, C. (2014). A study of intra-laminar damage in double-lap, multi-bolt, composite joints with variable clearance using continuum damage mechanics. Composite Structures, 116, pp. 441–452. doi:10.1016/j.compstruct.2014.05.051.
Yazdani Nezhad, H. and O’Dowd, N.P. (2012). Study of creep relaxation under combined mechanical and residual stresses. Engineering Fracture Mechanics, 93, pp. 132–152. doi:10.1016/j.engfracmech.2012.06.013.