Department of Civil Engineering
  1. Civil Engineering Structures
  2. Fluids Engineering Centre
  3. Multi-scale Geotechnical Engineering
  4. Temporary Works & Construction Method Engineering
  1. Fluids Engineering Centre Publications
Department of Civil Engineering

Fluids Engineering Centre Publications 2013

Journals

  • Kim S.;  J.M. Nouri;  Y. Yan; C. Arcoumanis Journal of Fuel "Effects of intake flow and coolant temperature on the spatial fuel distribution in a spray-guided DISI engine using PLIF" Vol.106, pp. 737-748 (2013)
  • A Dhand and K Pullen International Journal of Automotive Technology"Review of Flywheel based Internal Combustion Engine Hybrid Vehicles" Volume 14, No 5 (2013)
  • A. Kovacevic; S. Rane,  N. Stosic, M. Kethidi Int. J. for Numerical Methods in Fluids "Grid Generation for Variable Geometry Screw Compressor Rotors"  (2013)
  • A. Nikolopoulos, N. Nikolopoulos, A. Charitos, P. Grammelis, E. Kakaras, A.R. Bidwe, G. Varela    Chemical Engineering Science    "High resolution 3-D full-loop simulation of a CFB carbonator cold model" Vol. 90, pp. 137-150 (2013)
  • B. A. Reid; G. K. Hargrave; C.P. Garner; E. J. Long; M. Gavaises; N. Mitroglou; R. M. McDavid Journal of Fluid Mechanics "On the formation of string cavitation inside fuel injectors" May (2013)
  • BM Chen, PH Riley, YA Abakr, K Pullen, DB Hann and CM Johnson Journal of Power and Energy, Institution of Mechanical Engineers Part A "Design and development of a low-cost, electricity-generating cooking Score-Stove"  Volume 227, No 7  (2013)
  • Ekaterina Chukanova; Nikola Stosic;  Ahmed Kovacevic Journal of Engineering Science  'Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant''  Vol. 1, Issue 3, pp.68-79 (2013)
  • Gowree E. R.; Atkin C. J.; Gruppetta S.  "A simple digital-optical system to improve accuracy of hot-wire measurements" (2013)
  • I.K. Karathanassis, E. Papanicolaou, V. Belessiotis, G.C. Bergeles    Int. J. Heat and Mass Transfer "Three-dimensionality and buoyancy effects in laminar flow and heat transfer inside a heat sink with a stepwise-varying channel width" (2013)
  • IliasVorrias, Kostantinos Atsonios, Aristeidis Nikolopoulos, Nikos Nikolopoulos, Panagiotis Grammelis, Emmanuel Kakaras FUEL "Calcium Looping for CO2 capture from a lignite fired power plant" (2013)
  • Mitroglou  N.;  M. McLorn;  M. Gavaises  Journal of Fluid Mechanics "Instantaneous and ensemble average cavitation structures in micro-channel flow orifices" March (2013)
  • Mitroglou N.;  M. Gavaises Int. Journal of Engine Research "Mapping of cavitating flow regimes in injectors for medium/heavy duty Diesel engines" (2013)
  • N. Nikolopoulos, M. Agraniotis, I. Violidakis, E. Karampinis, A. Nikolopoulos, P. Grammelis,Ch. Papapavlou, S. Tzivenis, E. Kakaras  FUEL ''Parametric investigation of a renewable alternative for utilities adopting the co-firing lignite/biomass concept" (2013)
  • N. Nikolopoulos, R. Isemin, K. Atsonios, D. Kourkoumpas, S. Kuzmin, A. Mikhalev, A. Nikolopoulos, M. Agraniotis, P. Grammelis, Emm. Kakaras  Waste and Biomass Valorization    "Modeling of Wheat Straw Torrefaction as a Preliminary Tool for Process Design"  (2013)
  • R.D. Lockett; D. Ball; G.N. Robertson Optics and Lasers in Engineering "Experimental cross-correlation nitrogen Q-branch CARS thermometry in a spark ignition engine"    Vol.51, pp. 929 - 943 (2013)
  • R.D. Lockett; L. Liverani; D. Thaker; M. Jeshani; N.P. Tait    Fuel     "The characterization of diesel nozzle flow using high speed imaging of elastic light scattering"    Vol.106, pp. 605 - 616 (2013)
  • R.D. Lockett; M. JeshaniInternational Journal of Engine Research "An Experimental Investigation into the Effect of Hydrodynamic Cavitation on Diesel" Vol 50 (2), pp. 271-283 (2013)
  • Ron Dennis R, Pullen KR Journal of Power and Energy, Institution of Mechanical Engineers Part A    "Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit" Volume 227, Issue 7, pp. 740 - 751 (2013)
  • Roshan Moghadam, E., Long, C. A.;  Sayma, A. I.Journal of Power and Energy "A numerical investigation of moment coefficient and flow structure in a rotor-stator cavity with rotor mounted bolts" April (2013)
  • Sanchez T, Dennis R, Pullen K R    Journal of Power and Energy, Institution of Mechanical Engineers Part A 'Cooking and lighting habits in rural Nepal and Uganda - a survey for the SCORE project" Volume 227, Issue 7, pp. 727 - 739 (2013)
  • Sandira ELJŠAN, Nikola STOŠIĆ, Ahmed KOVACEVIC, Indira BULJUBASIC Research and Applications in Mechanical Engineering (RAME)  'Improvement of Energy Efficiency of Coal-fired Steam Boilers by Optimizing Working Parameters of Regenerative Air Preheaters ''  Volume 2, Issue 1  (2013)
  • Sham Rane; Ahmed Kovacevic;  Nikola Stosic;  Madhulika Kethidi Int. J. of Refrigeration - Special Issue on Compressor Technology  "CFD Modeling of Screw Compressors with Complex Multi Rotor Configurations" (2013)
  • Theodorakakos  A.;  N. Mitroglou;  C. Atkin;  M. Gavaises    FUEL    "Friction-induced heating in nozzle hole micro-channels under extreme fuel pressurisation" March 2013    (2013)

Conferences

  • STOŠIĆ N.;  Read M. ; Smith I.K. ASME 2013 International Mechanical Engineering Congress & Exposition IMECE2013 'Optimisation of Screw Expanders for Power Recovery from Low Grade Heat Sources'' November 13-21, 2013, San Diego, California, USA
  • Arjeneh M, Etemad S and Pullen K R  IMechE International Conference on Compressors and their Systems 'AN EXPERIMENTAL STUDY OF RADIAL LOW SPECIFIC SPEED TURBOCOMPRESSOR RUNNING IN REVERSE AS TURBOEXPANDER '' London,UK,  9-10 September 2013
  • Atkin  C.; Gowree, E. R. 48th Int. Symposium of Applied Aerodynamics "On the experimental measurement of a turbulent incompressible attachment line" March 2013, St-Louis, France
  • Carlton J. 1st FIGS Lecture, Royal Academy of Engineering 'Reflections on the Causes of Engineering Failure and Poor Performance'' London, 2013
  • Marchi A.;  Yan Y.; Nouri J.M.;  Arcoumanis C.  25th ILASS-Europe  "PIV Investigation on Flows Induced by Fuel Sprays from an Outwards Opening Pintle Injector for GDI engines"  Sep. 2013, Chania, Greece
  • Mirshahi M.; Nouri J.M.;  Yan Y.;  Gavaises M. 25th ILASS-Europe  "Link between in-nozzle Cavitation and Jet Spray in Gasoline Multi-hole Injectors"  Sep. 2013, Chania, Greece
  • Rewse-Davies Z.; Nouri J.; Gavaises M.; Arcoumanis C.  25th ILASS-Europe 'Near-Nozzle Instabilities in Gasoline Direct Injection Sprays'  Sep. 2013, Chania, Greece
  • Santini M.;  S. Fest-Santini;  G. E. Cossali;  N. Mitroglou;  M. Gavaises 25th ILASS-Europe  "Diesel Injector Real Geometry Acquired By X-Ray Micro-Tomography For Detailed In-Nozzle Cfd Simulations" Sep. 2013, Chania, Greece
  • STOŠIĆ N.; E Chukanova;  Kovacevic A. 8th International Conference Compressors and Their Systems     ''Numerical Analysis of Unsteady Behaviour of a Screw Compressor Plant System'' London, 8-10 September 2013
  • STOŠIĆ N.; Rane S;  Kovacevic A. Kethidi M 8th International Conference Compressors and Their Systems 'CFD analysis of screw compressors with variable geometry rotors''    London, 8-10 September 2013
  • Theodorakakos A.; Mitroglou N.; Gavaises M. 11th Engine Combustion Processes    'Simulation of heating effects caused by fuel pressurisation at 3000bar in Diesel fuel injectors' Ludwigsburg, Germany 2013

Find us

City, University of London

Northampton Square

London EC1V 0HB

United Kingdom

Back to top

City, University of London is an independent member institution of the University of London. Established by Royal Charter in 1836, the University of London consists of 18 independent member institutions with outstanding global reputations and several prestigious central academic bodies and activities.